2.Misalin alamar da ake buƙata don knurling
①Modulus m=0.2, madaidaiciyar hatsi, alamar ka'ida ita ce: madaidaiciya-m=0.2 (GB6403.3-1986).
② Reticulate m=0.3, ƙwanƙwasa ƙwanƙwasa, alamar ƙa'ida shine: reticulated m=0.3 (GB6403.3-1986).

3.Knurling aiki

(1) Shigar da kayan aikin.Dole ne shigarwa ya kasance da ƙarfi kamar yadda zai yiwu.
① Lokacin shigar da kayan aikin, tsawon tsayin daka ya kamata ya zama mafi guntu.
② Dogon aikin yana da goyan bayan saman.
③Lokacin da ake juya da'irar waje na ɓangaren dunƙule, diamita ya kamata ya zama kusan 0.25mm ƙasa da girman ƙarshe.

(2) Shigar da wuka mai dunƙulewa.
①Duba ko yankan kwakwalwan kwamfuta a kan wukar ƙullun an tsaftace su.Idan ya cancanta, yi amfani da goga na waya don tsaftace shi.
②Lokacin shigar da abin yankan dunƙule, ya kamata a daidaita fil ɗin pivot don karkatar da shi ta ɗan kusurwa.
④ Matse kayan aiki da ƙarfi.

(3) Yin aiki tuƙuru.
① Zaɓi ƙananan saurin yankan da babban abinci.
②Fara sandar kayan aikin injin sannan a shafa isasshe mai sanyaya zuwa kayan aikin knurling.
③ Girgiza wuka mai dunƙulewa don yanke cikin kayan aikin kuma a yi matsi har sai an samar da ƙirar lu'u-lu'u.
④ Ciyar da wukar a kwance sannan a ciyar da ita a tsayi har sai an sami tsayin daka da ake bukata.
⑤ Girgiza wukar da aka dunƙule don barin aikin da sauri.

(4) Tafiya.
A ƙarshen fuskar aikin, ana cire burrs ta hanyar yanke chamfer na 45 ° wanda ya kai kasan tsagi na knurling.Zuciya tana da girma.
③ Daidaita wuka mai dunƙule a gani, kuma a jujjuya shi zuwa wani ɗan kusurwa don gabatarwa cikin sauƙi.
④ Matse kayan aiki da ƙarfi.